Pengaruh Sudut Pulley dan Mangkok Kartel Terhadap Daya dan SFC Motor 160 cc

Muhammad Yusuf Firdaus; Listiyono Listiyono

doi:10.61132/mars.v2i4.241

Authors

Muhammad Yusuf Firdaus Politeknik Negeri Malang
Listiyono Listiyono Politeknik Negeri Malang

DOI:

https://doi.org/10.61132/mars.v2i4.241

Keywords:

Pulley degree, cartel, torque, SFC

Abstract

Significant developments in the the automotive field from year to year has always increased, accompanied by with the advancement of various supporting components. Apart from functioning as a means of transportation, motorbikes are also a hobby for some people. The objectives of this research are Analyzing the effect of the motorcycle CVT pulley tilt angle on the power and SFC produced by a 160cc motorcycle. produced by a 160cc motorcycle. Analyzing the effect of cartels on the surface of the double bowl of the CVT pulley, on the power and SFC of a 160cc motorcycle. and SFC of a 160cc motorcycle and to obtain the degree of tilt angle on the pulley and the variation of the surface size of the pulley bowl cartel that provides the best performance for 160cc motorcycles. This research uses type of quantitative research with experimental methods. All data collection was carried out on a dynamometer test machine, where the first step was to placing the motorcycle accurately on the predetermined roller bearings. Determined. After the engine and all the measuring equipment were properly installed, the next testing process is to test the power and fuel consumption until data collection. The results of this study get the highest power on a 14° pulley with a 2mm cartel bowl reaching a power of 11.92 HP and get the most optimal SFC value with a value of 0.06813 kg / HP.h. Then the two way anova test was conducted getting an alpha value of less than 0.05. So that the variation has significant influence.

References

Anwar, S. (2021). PEMBUATAN SISTEM KONTROL PEMINDAH GIGI OTOMATIS UNTUK TRANSMISI MANUAL TIPE CONSTANT MESH PADA SEPEDA MOTOR SATU SILINDER BERBASIS ARDUINO [Universitas Negeri Jakarta]. Retrieved from http://repository.unj.ac.id/id/eprint/15336

Harsanta, H., & Parta, P. (2020). PENGARUH VARIASI SUDUT PRIMARY PULLEY PADA TRANSMISI SEPEDA MOTOR SCOOPY 110 CC TAHUN 2014 TERHADAP DAYA DAN TORSI. Motor Bakar : Jurnal Teknik Mesin, 4(1). https://doi.org/10.31000/mbjtm.v4i1.5710

Ilmy, I., & Sutantra, I. N. (2018). Pengaruh Variasi Konstanta Pegas dan Massa Roller CVT Terhadap Performa Honda Vario 150 cc. Jurnal Teknik ITS, 7(1). https://doi.org/10.12962/j23373539.v7i1.29829

Indra Wahyu Prasetyo. (2023). THE EFFECT OF VARIATION IN THROTTLE BODY DIAMETER AND ENGINE SPEED ON POWER AND SPECIFIC FUEL CONSUMPTION IN A 149 CC GASOLINE ENGINE. Jurnal Teknik Mesin, 2(2), 200–205. https://doi.org/10.33795/j-meeg.v2i2.3226

Melkias, A., Putra, E., & Rusmana, R. (2023). ANALISIS PENGARUH PENGGUNAAN BAHAN BAKAR PERTALITE, BP 90, DAN REVVO 90 TERHADAP PERFORMA MESIN SEPEDA MOTOR XEON 2011. Jurnal Teknik Energi, 12(1), 42–47. https://doi.org/10.35313/energi.v12i2.5162

Monasari, R., Firdaus, A. H., & Qosim, N. (2021). Pengaruh Penambahan Zat Aditif Pada Campuran Bahan Bakar Bensin – Bioethanol Terhadap Specific Fuel Consumption. Jurnal Pendidikan Teknik Mesin Undiksha, 9(1), 1–10. https://doi.org/10.23887/jptm.v9i1.31797

Panjalu, S. S. A. (2023). PENGARUH VARIASI CLUTCH HOUSING DAN JENIS CLUTCH CARRIER TERHADAP DAYA PADA CVT SEPEDA MOTOR 110 CC. Retrieved from https://publikasiilmiah.unwahas.ac.id/index.php/MOMENTUM/article/view/9123

Saputra, K. A. I., Dantes, K. R., & Wiratmaja, I. G. (2021). Analisis Pengaruh Variasi Sudut Derajat Primary Pulley Terhadap Peningkatan Torsi Dan Daya Pada Kendaraan Dengan Sistem Continuous Variable Transmission. Majamecha, 3(2). https://doi.org/10.36815/majamecha.v3i2.1544

Setyawan Indar Putra, J. A., & Kaelani, Y. (2017). Studi Eksperimental dan Analisa Laju Keausan Roller pada Sistem Continously Variable Transmission (CVT) dengan Gerakan Reciprocating. Jurnal Teknik ITS, 5(2). https://doi.org/10.12962/j23373539.v5i2.20807

Wijaya, I. M. D. A. (2020). Analisis Pengaruh Bentuk Roller Slidding Terhadap Torsi Dan Daya Kendaraan Berbasis Continously Variable Transmision (CVT) [UNIVERSITAS PENDIDIKAN GANESHA]. Retrieved from http://repo.undiksha.ac.id/id/eprint/4684