Pengaruh Tegangan dan Bentuk Geometri Flywheel terhadap Energi Kinetik pada Motor Starter dan Massa Tetap Flywheel

Ravi Fadila Hafis; Wirawan Wirawan

doi:10.61132/mars.v3i4.963

Authors

Ravi Fadila Hafis Politeknik Negeri Malang
Wirawan Wirawan Politeknik Negeri Malang

DOI:

https://doi.org/10.61132/mars.v3i4.963

Keywords:

Flywheel, Geometric Shape, Kinetic Energy, Starter motor, Voltage

Abstract

Flywheel is an important element in the motor starter system due to its ability to store relase kinetic energy during the rotation process. This study aims to evaluate the effect of rotation speed variation and flywheel geometry shape on the kinetic energy produced, assuming the flywheel mass is fixed. The analysis is conducted through theoretical approach and numerical simulation using the rotational kinetic energy equation, with I as the moment of inertia that depends on the geometry shape,and as the angular velocity and shape of the flywheel. The results show that the geometry shape greatly affects the moment of inertia, and at the same angular velocity, the flywheel with larger moment of inertia is able to store more kinetic energy. The conclusion of this study provides recommendations in the selection of the optimal flywheel design to improve the efficiency of the motor starter system.

References

Bianchini, C., Torreggiani, A., David, D., & Bellini, A. (2021). Design of motor/generator for flywheel batteries. IEEE Transactions on Industrial Electronics, 68(10), 9675–9684. https://doi.org/10.1109/TIE.2020.3026292

Djuhana, S. (2019). Pengaruh massa flywheel terhadap energi kinetik, tegangan serta daya luaran pada flywheel energy storage system. Journal of Technical Engineering: Piston, 3(1), 17–23.

Jauch, C., Jost, R., & Kloft, P. (2024). Hydraulic variable inertia flywheel. Applied Energy, 360, 122830. https://doi.org/10.1016/j.apenergy.2024.122830

Maksimov, N. M., Savosteenko, N. V., Semenova, K. D., & Belov, N. A. (2020). Optimization of flywheel for starter-generator based on the differential electric drive. IOP Conference Series: Materials Science and Engineering, 919(6). https://doi.org/10.1088/1757-899X/919/6/062065

Neelakandan, V., Ganesan, T., & Rao, P. C. (2019). Weight optimization of housing bracket for electrical starter motor using FEA. Procedia Structural Integrity, 14, 345–353. https://doi.org/10.1016/j.prostr.2019.05.043

Noland, J. K., Leandro, M., Suul, J. A., & Molinas, M. (2020). High-power machines and starter-generator topologies for more electric aircraft: A technology outlook. IEEE Access, 8, 130104–130123. https://doi.org/10.1109/ACCESS.2020.3007791

Olabi, A. G., Wilberforce, T., Abdelkareem, M. A., & Ramadan, M. (2021). Critical review of flywheel energy storage system. Energies, 14(8), 2159. https://doi.org/10.3390/en14082159

Permana, T., Daryanto, E., & Hutajulu, O. Y. (2023). Analisis kelistrikan sistem starter tipe konvensional untuk penggerak mula motor bensin. Jurnal Insinyur Profesional, 2(3), 102–107.

Samshette, S. M., & Swami, M. C. (2015). Comparative study of different geometry flywheel by analytical and Ansys. IOSR Journal of Mechanical and Civil Engineering, 12(5), 1–6. https://doi.org/10.9790/1684-12530106

Selvaraj, A., Ron Carter, S. B., & Thangavel, S. (2020). Design of non-solenoidal operation of starter motor. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 234(13), 3095–3102. https://doi.org/10.1177/0954407020925714

Shinde, A., Rawat, K. S., Mahajan, R., Pardeshi, V., Kamanna, B., & Sheravi, S. (2017). Design and analysis of flywheel for different geometries and materials. Global Journal of Enterprise Information System, 9(1), 96–99. https://doi.org/10.18311/gjeis/2017/15872

Stas, P.-J. C., Ghimire, S., & Ouerdane, H. (2020). Modeling flywheel energy storage system charge and discharge dynamics. arXiv. http://arxiv.org/abs/2005.14634

Surabidin, & Djuhana. (2019). Pengaruh massa flywheel terhadap energi kinetik, tegangan serta daya luaran pada flywheel energy storage system. Piston: Journal of Technical Engineering, 3(1), 17–23.

Vishnurameshkumar, R., Kingsly, A., Karthikeyan, P., Muthukumaran, R., & Saran, B. (2015). Starter motor control system. International Journal of Innovative Science, Engineering & Technology (IJISET), 2(9), 514–520. http://www.ijiset.com/

Xu, K., Guo, Y., Lei, G., & Zhu, J. (2023). A review of flywheel energy storage system technologies. Energies, 16(18), 6462. https://doi.org/10.3390/en16186462