Prototype Setrika dan Pelipat Pakaian Otomatis Berbasis Microcontroller
DOI:
https://doi.org/10.61132/uranus.v3i1.694Keywords:
Automatic ironing, Clothes folding, Household technologyAbstract
Improving efficiency and quality in ironing and folding clothes is a primary concern in modern households. This research aims to develop a prototype of an automatic ironing and folding device that enhances productivity while reducing processing time compared to manual methods. Testing was conducted on three types of fabric materials: polyester, cotton, and linen, by comparing time and folding quality between the automatic and manual methods. The results showed that the automatic prototype completed the process in an average of 5 minutes for all fabric types, compared to 8 minutes with the manual method. In terms of folding quality, the automatic prototype demonstrated more consistent results with a high level of neatness across all fabric types. The conclusion of this study is that using the automatic ironing and folding prototype provides significant time efficiency and improves quality compared to the manual method. These findings contribute to the development of more effective and efficient household technologies.
References
Menurut Anggraeni dan Irviani (2017, “Bab Ii Landasan Teori,” J. Chem. Inf. Model., vol. 53, no. 9, pp. 1689–1699, 2019, [Online]. Available: http://kbbi.web.id/preferensi.htmlDiakses
A. M. Nurkholis, “F-Cloth Automatic Solusi Cerdas Melipat Pakaian Dengan Praktis Berbasis Arduino Uno,” Progr. Stud. Tek. Elekto, Fak. Teknol. Inf. dan Elektro, 2018.
T. D. Indraswati and M. H. Vandika, : “Pelipat Baju dan Penyetrika Uap Otomatis :,” Inst. Teknol. Indones., p., 2021, [Online]. Available: http://repository.iti.ac.id/handle/123456789/801
A. T. Handoko, “Prototype setrika uap otomatis,” Universitas Bina Darma Palembang, 2020. [Online]. Available: https://repository.binadarma.ac.id/1633/
Akfi Yurkha Kusuma, “Rancang Bangun Alat Pelipat Baju Otomatis Menggunakan Arduino Uno,” Repos. Univ. Din., vol. 8, no. 75, pp. 147–154, 2020, [Online]. Available: https://doi.org/10.1016/j.jnc.2020.125798%0Ahttps://doi.org/10.1016/j.smr.2020.02.002%0Ahttp://www.ncbi.nlm.nih.gov/pubmed/810049%0Ahttp://doi.wiley.com/10.1002/anie.197505391%0Ahttp://www.sciencedirect.com/science/article/pii/B9780857090409500205%0Ahttp:
M. R. Rahmat, “Perancangan dan Pembuatan Tungku Heat Treatment,” J. Ilm. Tek. Mesin Univ. Islam 45, vol. 3, no. 2, pp. 133–148, 2015.
H. Santosa; and Yuliati, “Scientific Journal Widya Teknik,” Sci. J. Widya Tek., vol. 21, no. 1, pp. 14–20, 2022.
I. W. Kinnansih and Dzulkiflih, “RANCANG BANGUN ALAT PENGONTROL SUHU DAN KELEMBAPAN PADA TEMPAT PENETASAN TELUR MENGGUNAKAN SENSOR DHT22 DAN MOTOR SWING BERBASIS IoT,” 57Jurnal Inov. Fis. Indones. , vol. 11, no. 3, pp. 57–72, 2022.
Maxim Integrated, “MAX31865 Datasheet,” https://datasheets.maximintegrated.com/en/ds/MAX31865.pdf, pp. 1–26, 2015, [Online]. Available: https://datasheets.maximintegrated.com/en/ds/MAX31865.pdf
A. M. S. Nugroho, R. Hidayat, and A. Stefanie, “Implementation of Stepper 28Byj-48 and Servo Mg996R As a Roasting Arm Robot in an Arduino Uno-Based Automatic Satay Grill Tool,” JEEMECS (Journal Electr. Eng. Mechatron. Comput. Sci., vol. 5, no. 1, pp. 47–54, 2022, doi: 10.26905/jeemecs.v5i1.5166.
I. R. Muttaqin and D. B. Santoso, “Prototype Pagar Otomatis Berbasis Arduino Uno Dengan Sensor Ultrasonic Hc-SR04,” JE-Unisla, vol. 6, no. 2, p. 41, 2021, doi: 10.30736/je-unisla.v6i2.695.
I. M. Arsana, “Analysis Of Tire Filling Result on Tire Patch With Automatic Temperature Controller,” J. Penelit. Saintek, pp. 126–139, 2017.
A. S. Nurcahyo M Ibrahim Ashari Sotyohadi, “Seminar Hasil Elektro S1 ITN Malang Tahun Akademik Ganjil/ ALAT PELIPAT PAKAIAN OTOMATIS BERBASIS PENGENDALI MIKRO,” 2018.
- Dr. Hendra Jaya, S.Pd., M.T., Perawatan & Perbaikan Alat Elektronika (Keterampilan Vokasional BAGI ANAK BERKEBUTUHAN KHUSUS). Makassar, Sulawesi Selatan: Fakultas MIPA Universitas Negeri Makassar, 2017.
Feri Djuandi, “Pengenalan Arduino,” E-book. www. tobuku, pp. 1–24, 2011, [Online]. Available: http://www.tobuku.com/docs/Arduino-Pengenalan.pdf
D. Sugiarto, M. Baehaqi, and E. Subiyanta, “Rancang Bangun Sistem Absensi menggunakan RFID Berbasis Web,” J. Mestro, vol. 4, no. 1, pp. 25–31, 2022.
K. Kahar, S. Golam, S. Mathurkar, and P. Kale, “Industrial Robotic Arm System,” vol. 2, no. 1, pp. 62–67, 2024, [Online]. Available: https://www.researchgate.net/publication/382002723
R. A. SETIAWAN, “Perancangan Setrika Listrik Tanpa Kabel Dengan Pengaturan Suhu Otomatis Berbasis Arduino Uno,” 2019, [Online]. Available: http://digilib.unila.ac.id/id/eprint/56682%0Ahttp://digilib.unila.ac.id/56682/2/SKRIPSI FULL TEKS TANPA PEMBAHASAN.pdf
Ibrahim, “Bangka Belitung:,” Elect. Dyn. Indones., pp. 87–101, 2018, doi: 10.2307/j.ctv1xxzz2.11.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Uranus : Jurnal Ilmiah Teknik Elektro, Sains dan Informatika
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
