Produksi Daun Gergaji Baja 2 Sisi Tajam, Ukuran 310x30x0,8 mm, Kapasitas 20 Biji/Jam
DOI:
https://doi.org/10.61132/mars.v4i3.1632Keywords:
Beginner Saw, Medium Carbon Steel, Saw Blade , Steel Hardening, Two Sharp EdgesAbstract
The frequent breakage of saw blades and the use of blades that are not suitable for beginner saw operators present a significant problem in metal sawing activities. This study aims to produce a double-sided sharp steel saw blade with dimensions of 310×30×0.8 mm. The production process consists of several stages, namely designing the double-sided sharp saw blade, cutting high-carbon steel material to size, drilling 4 mm diameter holes at both ends with a 310 mm distance between holes, forming sharp edges on both sides of the blade, hardening only the two cutting edges, followed by labeling, packaging, and quality and dimensional standard inspection. The production output is a double-sided sharp steel saw blade measuring 310×30×0.8 mm made from medium carbon steel. The manufacturing cost is Rp. 3,500 per unit with a processing time of 3 minutes per unit. These results indicate that the saw blade can be mounted on a general saw handle and has improved resistance to breakage, making it more suitable for beginner users whose sawing motion is not consistently aligned on a single flat plane.
References
Callister, W. D., & Rethwisch, D. G. (2021). Materials science and engineering: An introduction (10th ed.). Wiley. https://www.wiley.com/en-us/Materials+Science+and+Engineering%3A+An+Introduction
Carasi, G., Yu, B., Hutten, E., Zurob, H., Casati, R., & Vedani, M. (2021). Effect of heat treatment on microstructure evolution of X38CrMoV5-1 hot-work tool steel produced by L-PBF. Metallurgical and Materials Transactions A, 52(6), 2564–2575. https://doi.org/10.1007/s11661-021-06248-y
Chen, G., Yao, Y., Su, B., Li, G., & Zeng, B. (2025). Effect of heat treatment process on microstructure and properties of base steel 30Cr4MoNiV for bi-metal band saw blade. Heat Treatment of Metals, 47(1), 266–271. https://doi.org/10.13251/j.issn.0254-6051.2022.01.044
Dong, S., & Hu, J. (2021). Heat treatment process of 75Cr1 steel for saw blade substrate and its microstructure and mechanical properties. Heat Treatment of Metals, 46(9), 193–198. https://doi.org/10.13251/j.issn.0254-6051.2021.09.035
Duc, T. M., Ngoc, T. B., & Tuan, N. M. (2024). A study on mechanisms of saw-tooth chip formation in hard turning under hybrid nanofluid-assisted MQL environment. Advances in Mechanical Engineering, 16(10), 1–13. https://doi.org/10.1177/16878132241289286
Ficak, A. (2024). Finite element modeling of high-speed orthogonal cutting: A contribution to understanding the influence of mesh parameters on saw-toothed chip formation. Materials, 17(22), 5407. https://doi.org/10.3390/ma17225407
Ficak, G., & Łukaszek-Sołek, A. (2024). Durability of forging tools used in the hot closed die forging process: A review. Materials, 17(22), 5407. https://doi.org/10.3390/ma17225407
Guo, L. (2024). Design of vibration and noise reduction for ultra-thin cemented carbide circular saw blades in woodworking based on multi-objective optimization. Machines, 15(9), 1554. https://doi.org/10.3390/f15091554
Harningsih, Litiyatmi, & Daryanto, T. (2022). Effects of heat treatment on microstructure and hardness of D2 tools. Smart Technology, 3(1), 1–3. https://doi.org/10.23917/arstech.v3i1.761
Kalpakjian, S., & Schmid, S. R. (2023). Manufacturing engineering and technology in SI units. Pearson. https://www.pearson.com/en-us/subject-catalog/p/manufacturing-engineering-and-technology/P200000003294
Kang, J., Zhang, J., & Bai, T. (2024). Early condition monitoring of circular saw blades with large diameter-to-thickness ratios under high-speed sawing of hard metals. Measurement, 235, 114933. https://doi.org/10.1016/j.measurement.2024.114933
Kang, J., Zhang, J., Wang, K., Zhang, D., Bai, T., & Zhang, H. (2023). Analysis of wear mechanism and sawing performance of carbide and PCD circular saw blades in machining hard aluminum alloy. Journal of Mechanical Engineering Science, 237(6–7). https://doi.org/10.1177/09544054221126969
Klippel, H., Stefan, S., Kuffa, M., & Wegener, K. (2022). Dry cutting experiments database Ti6Al4V and CK45. arXiv. https://doi.org/10.48550/arXiv.2209.04197
Mac, T., Luyen, T., & Nguyen, D. (2023). Assessment of the effect of thermal-assisted machining on the machinability of SKD11 alloy steel. Metals, 13(4), 669. https://doi.org/10.3390/met13040699
Nurtanto, F., & Darmanto, S. (2023). Analysis of the effect of tempering temperature on the formation of microstructure and hardness values in SKD11 steel. Multidisciplinary Research and Analysis, 6(1), 45–50. https://doi.org/10.47191/ijmra/v6-i1-06
Saputra, I., Ariyanto, N. P., & Febri, M. (2020). Pengaruh temperatur tempering terhadap pembentukan struktur mikro dan kekerasan baja SKD 11 untuk tool steel. Jurnal Teknologi, 2(1), 10–13. https://doi.org/10.30871/jatra.v2i1.1787
Setiawan, H., & Khoeron, S. (2024). Pengaruh heat treatment pada kekerasan material baja SKD 11. Crankshaft, 7(4), 22–33. https://doi.org/10.24176/cra.v7i4.13872
Wu, X., & Lan, F. (2023). Study effect of HIP & heat treatment on MIM porous tool steel SKD11. Journal of Physics: Conference Series, 2582(1), 012057. https://doi.org/10.1088/1742-6596/2528/1/012057
Yan, X., Cui, Y., Qiu, H., Ding, T., & Zhu, N. (2023). The transverse vibration characteristics of circular saw blade on mobile cantilever-type CNC sawing machine. Machines, 11(5), 549. https://doi.org/10.3390/machines11050549
Yuan, Z., & Riaz, A. (2023). Precision machining by dicing blades: A systematic review. Machines, 11(2), 259. https://doi.org/10.3390/machines11020259
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
