Pembuatan Atap Galvalum Gelombang Trapesium Dimensi 600x102x3 cm, Tebal 0,3 mm, Kapasitas 50 Lembar/Jam
DOI:
https://doi.org/10.61132/mars.v4i3.1661Keywords:
Aluminum Zinc Coated Steel, Dimensions 600x102x3 Cm, Galvalum Roof, SNI 4096:2007, Trapezoidal WaveAbstract
Less rigid, easy to rust trapezoidal wave galvalum roof as a problem encountered in industrial buildings, warehouses, commercial facilities, and residential homes. The purpose of making a trapezoidal wave galvalum roof with dimensions of 600x102 cm, height 3 cm, thickness 0.30 mm. The manufacturing method includes: design of a trapezoidal wave galvalum roof with dimensions of 600x102 cm, height 3 cm, thickness 0.30 mm; selection including purchase of Aluminum Zinc coated steel (BJLAS) materials; design and manufacture of roll-forming; formation of a trapezoidal wave profile with dimensions of 600x102 cm, height 3 cm; cutting the trapezoidal wave galvalum roof every 6 m; and inspection of quality-dimensions-standards. The result of the manufacture is a trapezoidal wave galvalum roof with dimensions of 600x102 cm, 3 cm high, 0.30 mm thick with a total manufacturing cost of Rp. 328,000/sheet, and a manufacturing duration of 1.2 minutes/sheet, which means that the trapezoidal wave galvalum roof meets the dimensional specifications of SNI BJLAS G550-SNI 4096:2007 and is suitable for application as a roof covering system on medium-span buildings.
References
Cao, Q., Zhu, Y. & Zhang J. H. (2026). Study on the Stability and Bearing Capacity of High-Strength Steel C-section Columns with Complex Longitudinal Stiffeners, Structure, 86. https://doi.org/10.1016/j.istruc.2026.111255
Dogar, A. U. R., Rehman, H. M. U., Tafsirojjaman, T. & Iqbal, N. (2020). Experimental Investigations on Inelastic Behaviour and Modified Gerber Joint for Double-Span Steel Trapezoidal Sheeting. Structures, 24, 514-525. https://doi.org/10.1016/j.istruc.2020.01.042
Elewa, R. E., Afolalu, S. A. & Fayomi, O. S. J. (2019). Overview Production Process and Properties of Galvanized Roofing Sheets. Journal of Physics: Conference Series, 1378(2), 022069. https://doi.org/10.1088/1742-6596/1378/2/022069
Fei, H. & Zihuai, N. (2025). Status of Research and Development Trend of Roll Forming Technology. Journal of Mechanical Engineering, 61(11), 279-300. https://doi:10.3901/JME.2025.11.279
Franco, J. M .S. & Batista, E. d. M. (2017). Buckling Behavior and Strength of Thin-Walled Stiffened Trapezoidal CFS under Flexural Bending, Thin-Walled Structures, 117, 268-281. https://doi.org/10.1016/j.tws.2016.11.027
Garifullin, M., Mela, K., Renaux, T., Izabel, D., Holz, R. & Fauth, C. (2021). Load-bearing Capacity of Cold-formed Sinusoidal Steel Sheets, Thin-Walled Structures, 161(12), 1-16. https://doi.org/10.1016/ j.tws.2021.107475
Gong, J., Ghabraie, K., Weiss, M., Sreenivas, A. & Rolfe, B. (2023). Manufacturing Constrained Shape Optimisation of Variable Width Flat Web Formed Channels, The International Journal of Advanced Manufacturing Technology, 128(1-2), 1-24. https://doi.org/10.1007/s00170-023-11806-2
Haroen, H. Z., Herm, H., Bert, H. H. S. & Mohen, M. M. (2020). Explicit and Interaction Direct Strength Methods for Combined Web Crippling and Bending Moment Failure of First-Generation Trapezoidal Steel Sheeting. Thin-Walled Structures, 157, 106927. https://doi.org/10.1016/j.tws.2020.106927
Hui, X. & Wang, X. (2018). Forming Quality Analysis on the Cold Roll Forming C-Channel Steel, Materials, 11, 1911. doi:10.3390/ma11101911
Kusuma, Y. & Pulansari, F. (2025). Analisis Pemesanan Konsumen PT. Kepuh Kencana Arum dengan Metode Root Cause Analysis. Jurnal Hasil Penelitian dan Pengkajian Ilmiah Eksakta, 4(1), 14-22. https://doi.org/10.47233/jppie.v4i1.1783
Lee, J., Bong, H. J., Kim, C., Kim, D. & Lee, M. G. (2023). Investigation on a Novel In-line Incremental Die Forming Process for Sheet Metals. Thin-Walled Structures, 193, 111281. https://doi.org/10.1016/j.tws.2023.111281
Murugesana, M., Sajjadb, M. & Jung, D. W. (2020). Experimental and Numerical Investigation of Cold Roll Forming Process. IOP Conference Series: Materials Science and Engineering, 758, 012067. https://doi.org/10.1088/1757-899X/758/1/012067
Putra, W. T. (2019). Analysis Seng Galvalum Tensile Strength Against the Load That is Given. Jurnal Mesin, 5(1), 9-14. https://doi.org/10.33019/jm.v5i1.767
Pieper, L. & Mahendran, M. (2023). Numerical Investigation and Design of Crest-Fixed Corrugated Steel Claddings under Static Wind Uplift Loading. Thin-Walled Structures, 182, 110270. https://doi.org/10.1016/j.tws.2022.110270
Timothy, S. & Gauchey, M. (2025). A Cost-Effective Cold Roll-Forming FE Model for Industrial Applications. Material Forming-ESAFORM 54, 989–994. https://doi.org/10.21741/9781644903599-106
Tiwari, S., Roy, K., Fang, Z. & Lim, J. B. P. (2025). Metal Roof Cladding System under Wind Loading: State-of-the-Art. Journal of Wind Engineering and Industrial Aerodynamics, 257, 105939. https://doi.org/10.1016/j.jweia.2024.105939
Wang, J., Liu, H. M., Li, S. F. & Chen, W. J. (2022). Cold Roll Forming Process Design for Complex Stainless-Steel Section Based on COPRA and Orthogonal Experiment. Materials, 15(22), 8023. https://doi.org/10.3390/ma15228023
Wijanarko, W. Z. Y. & Prasetiyo, A. B. (2025) Stiffness Improvement of Corrugated Metal Roofs through Cross-sectional Geometry Modification. Jurnal Inovasi Mesin, 7(2), 1-6. http://DOI: 10.15294/jim.v7i2.31504
Willems, D. W. C., Hofmeyer, H., Snijder, H. H. & Schafer, B. W. (2021). The Direct Strength Method for Combined Bending and Web Crippling of Second-Generation Trapezoidal Steel Sheeting. Thin-Walled Structures, 167, 108149. https://doi.org/10.1016/j.tws.2021.108149
Xie, Z. & Zhang, Y. (2023) Analysis of Natural Vibration Characteristics of Metal Roof Panel of Large-Span Standing-Seam Metal Roof System, Buildings, 13(11), 1-19. https://doi.org/10.3390/buildings13112855
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
