Pengaruh Panjang Serat terhadap Kekuatan Tarik Fiber Metal Laminate Composite

Hanif Arsalan Dani Subekti; Hilmi Iman Firmansyah

doi:10.61132/mars.v2i5.347

Authors

Hanif Arsalan Dani Subekti Politeknik Negeri Malang
Hilmi Iman Firmansyah Politeknik Negeri Malang

DOI:

https://doi.org/10.61132/mars.v2i5.347

Keywords:

Fiber Metal Laminate, Hybrid Composite, Ramie

Abstract

This study aims to evaluate the effect of ramie fiber length on the tensile strength of Fiber Metal Laminate (FML) hybrid composites. The background of this research is the saturation with the use of synthetic composite materials, which encourages the search for renewable materials to replace synthetic fibers. In this study, ramie fibers were immersed in a 6% NaOH solution before use, and the composite manufacturing process was carried out using the hand lay-up method. Annealed Aluminum 1100 was used as the laminating layer. The results of the study showed that the highest tensile strength was obtained in composites with a ramie fiber length of 5 cm, with a tensile strength of approximately 105 MPa. These findings indicate the potential of using ramie fibers as a sustainable and efficient alternative in FML hybrid composite applications.

References

Afzal. (2020). Modeling of damage evolution of fiber-reinforced composite structure. IntechOpen, 1-22.

Andi Saidah, S. E. (2018). Pengaruh fraksi volume dan orientasi serat terhadap kekuatan. In Seminar Nasional Teknik Mesin.

Daiane. (2012). Preparation and characterization of ramie-glass fiber reinforced polymer matrix hybrid composites. Materials Research, 15(4), 415-420.

Habibie, S. (2021). Serat alam sebagai bahan komposit ramah lingkungan: Suatu kajian pustaka. Jurnal Inovasi dan Teknologi Material, 1(1), 1-9.

Harun N. Beliu, Y. M. (2016). Analisa kekuatan tarik dan bending pada komposit Widuri - polyester. LONTAR.

Hilmi Iman Firmansyah, A. P. (2018). Pengaruh mechanical bonding pada aluminium dengan serat. Jurnal Rekayasa Mesin.

Hilmi Iman Firmansyah, W. M. (2022). Analysis of fiber metal composite shear strength using independent variables of fiber angle orientation and metal surface roughness. Jurnal Energi dan Teknologi Manufaktur, 11(1), 29-33.

Rahmanto. (2019). Analisa kekuatan tarik dan impak komposit berpenguat serat kelapa dan tebu dengan perendaman NaOH dan menggunakan resin polyester. Jurnal Teknologi Material, 31(1), 31-40.

Rokki. (2021). Analisa kekuatan bahan komposit yang diperkuat serat bambu menggunakan resin polyester dengan memvariasikan susunan serat secara acak dan lurus memanjang. Science Journal of Mechanical Engineering, 4(2), 28-34.

Sujita. (2021). Karakteristik kekuatan tarik dan morfologi material komposit berpenguat serat pohon pisang saba dengan perlakuan kimia. Jurnal Mekanik Terapan, 17(1), 16-24.

Suresha. (2020). Role of graphene nanoplatelets and carbon fiber on mechanical properties of composites. Material Research Express.