Studi Deskriptif terhadap Teknik Pengelasan SMAW pada Praktikum Taruna Teknika AMN Cilacap

Immawan Insani; Priyani Budiyarti

doi:10.61132/mars.v3i3.866

Authors

Immawan Insani Akademi Maritim Nusantara Cilacap
Priyani Budiyarti Akademi Maritim Nusantara Cilacap

DOI:

https://doi.org/10.61132/mars.v3i3.866

Keywords:

Cadets, Descriptive, Practical, SMAW welding, Technical

Abstract

This study aims to describe the implementation of Shielded Metal Arc Welding (SMAW) techniques in practical training conducted by cadets of the Teknika Study Program at AMN Cilacap. The method employed is descriptive quantitative using a Likert-scale questionnaire (1–5). The research sample consisted of 40 second-semester cadets selected through purposive sampling. The questionnaire was structured based on four aspects: theoretical understanding, practical skills, compliance with safety procedures, and perceived obstacles. The results show that theoretical understanding was at a high level (average score of 4.1; 87.5%), practical skills were categorized as adequate (75%), and compliance with safety procedures was very high (90%). However, obstacles were still significantly perceived, with an average score of 2.88 and only 27.5% of respondents giving positive responses. The main obstacles faced by cadets included limited welding equipment, insufficient training in specific welding positions, and inadequate practice time. This study recommends improvements in practical facilities, diversification of training in various welding positions, and more effective management of practice schedules to support optimal learning outcomes.

References

Arora, H., Singh, R., & Brar, G. S. (2019). Thermal and structural modelling of arc welding processes: A literature review. Measurement and Control (United Kingdom), 52(7–8), 955–969. https://doi.org/10.1177/0020294019857747

Bahora, E., & Mujiyono, M. (2019). Investigation of learning model of welding practices in 3G SMAW position welder competency formation in vocational high school. American Journal of Educational Research, 7(10), 725–730. https://doi.org/10.12691/education-7-10-8

Callao, M. B., & Tomarong, G. L. (2021). Certifying SMAW competency among senior high. Ilkogretim Online, 20(4), 3410–3425. https://doi.org/10.17051/ilkonline.2021.04.382

Dwi Cahyo, I. (2022). Penggunaan multi process welding machine untuk menunjang kegiatan praktikum pengelasan pada laboratorium pengelasan kapal (welding school) sekolah vokasi. Jurnal Pengelolaan Laboratorium Pendidikan, 4(1), 12–18. https://doi.org/10.14710/jplp.4.1.12-18

Engineering, M., & Journal, E. (2023). Relationship between knowledge and students’ welding practical skills. Mechanical Engineering Education Journal, 1(2), 53–61.

Hargiyarto, P., Marwanto, A., & Djatmiko, R. D. (2015). Analisis kesalahan esensial hasil pengelasan peserta lomba kompetensi siswa SMK tingkat Daerah Istimewa Yogyakarta. Jurnal Pendidikan Teknologi dan Kejuruan, 22(3), 350. https://doi.org/10.21831/jptk.v22i3.6841

Hartanto, C. F. B., & Haryani. (2020). Analisis tata kelola standar pendidik dan tenaga kependidikan pada pendidikan tinggi vokasi kemaritiman di Indonesia. Jurnal Sains Teknologi Transportasi Maritim, 2(1), 20–29. https://doi.org/10.51578/j.sitektransmar.v2i1.14

Khalid, A., Darmansyah, D., Barry, A., Saberani, S., & Fauzi, Y. R. (2020). Pelatihan pengelasan SMAW serta keselamatan kesehatan kerja dan pencegahan kecelakaan kerja pada pengelasan bagi usaha kecil menengah se-Kota Banjarmasin. Jurnal IMPACT: Implementation and Action, 2(1), 52–57. https://doi.org/10.31961/impact.v2i1.796

Lee, H. Y., Zhou, P., Duan, A., Wang, J., Wu, V., & Navarro-Alarcon, D. (2023). A multisensor interface to improve the learning experience in arc welding training tasks. IEEE Transactions on Human-Machine Systems, 53(3), 619–628. https://doi.org/10.1109/THMS.2023.3251955

Rose, M., Pate, M. L., Lawver, R. G., Warnick, B. K., & Dai, X. (2015). Assessing the impact of sequencing practicums for welding in agricultural mechanics. Journal of Agricultural Education, 56(1), 92–102. https://doi.org/10.5032/jae.2015.01092

Safriwardy, F., Nasrah, S., & Wansah, Z. (2022). Development of learning modules for welding techniques of shield metal arc welding (SMAW) on manual arc welding engineering subjects at vocational schools. International Journal for Educational and Vocational Studies, 4(2), 136. https://doi.org/10.29103/ijevs.v4i2.8385

Sandy, V., & Yuliadi, Z. (2019). Analisa pengaruh pemanasan awal pengelasan ulang aluminium 5083 pada lambung kapal. Jurnal Midship, 2(2), 39–46.

Technology, A. (2023). Waktu dan tempat penelitian. Journal of Applied Technology, 5(2), 167–173.

Wahab, A., Syahid, A., & Junaedi, J. (2021). Penyajian data dalam tabel distribusi frekuensi dan aplikasinya pada ilmu pendidikan. Education and Learning Journal, 2(1), 40. https://doi.org/10.33096/eljour.v2i1.91

Yunus, Y., Wibowo, T. W., Pambudi, R. G., & Prayogo, A. C. (2024). Towards improving welding skills: Creating innovative modules for teaching SMAW integrated 3D animation. Jurnal Ilmu Pendidikan, 30(1), 80–89. https://doi.org/10.17977/um048v30i1p79-89